SLNX Certificate Tool

To install an SSL certificate for the Delegation Server or MIE Server, use the SLNX Certificate Tool.

1. Start the SLNX Certificate Tool. Here are their storage destination paths:

• Delegation Server: \tools\SLNXCertificateTool\SLNXCertTool_DS.exe

• MIE Server: \tools\SLNXCertificateTool\SLNXCertTool_MIE.exe

2. Select the interface language to use during installation.

3. Click [Create CSR] to create a Certificate Signing Request (CSR).

   Note: When installing a full certificate, skip these steps.

   1. Enter Alternate Subject Names as necessary. Alternate Subject Names may not be supported by an internal certificate authority depending on its configuration.
   2. Click [Create].
   3. Copy and paste the displayed information to the form to be submitted to the Certificate Authority (CA).
   4. Save the certificate issued from the CA.

4. Click [Install intermediate Certificate] in the SLNX Certificate Tool.

5. Select the intermediate CA certificate issued by the Certificate Authority, then click (Open).

When installing a full certificate and CSR is not created in Step 3, you will be prompted to enter the password to access the private key.

6. Click [Install Certificate] in the SLNX Certificate Tool.

7. Select the certificate issued from the Certificate Authority, and then click [Open].

8. To trust all certificates while operating the system, select the [Trust All Certificates] checkbox, else leave the box unchecked.

9. Exit the SLNX Certificate Tool.